Overview
Blackfriar Professional Acrylic Floor Paint is quick drying, water based and multi-surface. Ideal for most previously painted surfaces, it protects floors and gives a hard wearing finish which stops the dusting of concrete surfaces.
- For domestic, commercial or light industrial
- Semi gloss finish
- Can be
NOT suitable for use over PVC, thermoplastic tiles, quarry tiles or granolithic concrete. Do not apply to concrete surfaces treated with alkali containing liquids or areas subjected to rising damp or treated with PVA bonding solutions.
| Area | Interior & Exterior |
| Recommended Use | Suitable for asphalt, Tarmac®, brickwork, concrete, cement, wood, metal and stone |
| Base | Water-Based |
| Coverage | 10-12m² per litre per coat |
| Drying Time | 4-6 Hours, 3-5 days full cure |
| Re-Coat Time | 6 Hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush, Roller |
| VOC Levels | Low |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
Preparation
Ensure the surface is sound, clean, dry and free from grease or any substance that is likely to cause issues with adhesion.
- Scrape off any old or flaking paint until you have a firm surface.
- Make sure that all oil, grease, dirt, and road salt is removed from areas under cars.
- Leave new concrete for at least 6 months before applying Blackfriar Professional Acrylic Floor Paint.
Application
Note: Always follow the manufacturer's directions found on the tin.
- Stir thoroughly before use. Apply with a brush or roller only, working the paint in any surface imperfections.
- Bare or New Surfaces: If the surface you're applying Blackfriar Professional Acrylic Floor Paint to is bare or new, first apply , followed by 1-2 coats of Blackfriar Professional Acrylic Floor Paint applied with a brush or roller
- Previously Painted Surfaces: Apply 1-2 coats with a brush or roller. Do not spray
- Do not apply in temperatures below 10°C, damp or humid conditions.
